You are now visiting the Philips lighting website. A localized version is available for you.
Suggestions
    Close filters Show filters
    Show more filters
    Show less filters
    • Product
    • Wattage (W)
    • Luminous flux (lm)
    • CCT (K)
    • IES
    • Leaflet

    Sort by:

        Product family information

        The UV-C batten is designed for the disinfection of surfaces and is suitable for a wide range of applications. The UV-C batten provides universal UV-C irradiance with homogenous distribution. Its disinfection capability is based on wattage used and a specific exposure time for a given distance from that surface. No person should be present at the time of usage, due to high risk of harm to eyes and skin. The performance is enhanced by a highly-reflective and durable aluminum body, which improves its efficacy even further and directs the UV-C light to the to-be-irradiated surfaces.The lamp holders and end caps are protected against UV-C thanks to dedicated shielding. There is a 1- and 2-lamp version available, for both the bare batten and reflector batten. This offers even a greater flexibility.

        Benefits

        UV-C light effectively deactivates most viruses and germs on directly irradiated surfaces*1. UV-C surface disinfection products, fitted with our UV-C light sources, can inactivate SARS-CoV-2 virus on surfaces by more than 99% to below detectable levels*2.
        Proven, effective disinfection over the useful long lifetime of lamp and luminaire
        Environmentally friendly - no ozone emissions during or after use
        Combined with safeguards such as controlled-access devices, it is used safely
        *1 Fluence (UV Dose) Required to Achieve Incremental Log Inactivation of Bacteria, Protozoa, Viruses and Algae Revised, updated and expanded by A. Haji Malayeri, M. Mohseni, B. Cairns and J.R. Bolton. With earlier contributions by Gabriel Chevrefils (2006) and Eric Caron (2006) With peer review by B. Barbeau, H. Wright (1999) and K.G. Linden.*2 Nadia Storm et al, Rapid and complete inactivation of SARS-CoV-2 by UV-C irradiation, 2020. Report available at https://www.nature.com/articles/s41598-020-79600-8. The UV-C irradiance used in this study was 0.849 mW/cm 2.

        Features

        Lamp configurations possible: 1-lamp or 2-lamps version
        Available with or without reflectors
        Philips T8 TUV lamp included: 18W or 36W
        Shortwave UV radiation peak at 253.7 nm (UVC)
        High reflective aluminum housing for better reflectivity and performance
        All plastic components are protected by dedicated UV-C shielding
        Various mounting options
        Complies with all applicable regulations and standards

        Applications

        Retail: Keep shopping carts, shelves and counters free from contamination
        Hair and beauty salons: Disinfect client rooms, operating floor, mirrors, chairs surfaces, and other sensitive areas
        Schools: Disinfect classroom walls, floors, desks and surfaces
        Offices: Neutralize work rooms, meeting spaces and corridors
        Banking: Disinfect counters, cash machines and work surfaces
        Hospitality: Disinfect guest rooms, reception areas and health facilities
        Food outlets: Eliminate bacteria on preparation surfaces and equipment
        Washrooms: Disinfect vanity units, basins and mirrors

        Warning & Safety

        DANGER: Risk Group 3 UV product. Like any disinfection system, UV-C lamps and devices must be installed and used in the correct way.
        Direct exposure to UV-C can be dangerous and result in a sunburn-like reaction to the skin and serious damage to the cornea. As UV-C is invisible to the eye, the UV-C batten must be installed together with adequate safeguards to ensure that the UV-C batten can be operated in a safe way. The UV-C battens are only to be used as components in a system that consists of adequate safety safeguards such as, but not limited to, those indicated in the mounting instruction and/or user manual.
        Philips UV-C devices must only be sold through qualified partners and installed by professionals according to our stringent safety and legal requirements. Our UV-C products are not meant to be used in applications or activities which may cause and/or lead to death, personal injury and/or damage to the environment.
        Disclaimer:
        The UV-C battens’ effectiveness in the inactivation of certain viruses, bacteria, protozoa, fungi or other harmful micro-organisms is as described under Benefits. Signify and its group of companies do not promise or warrant that the use of UV-C battens will protect or prevent any user from infection and/or contamination with any harmful micro-organisms, illness or disease. The UV-C battens are not approved for, are not intended and must not be used to disinfect medical devices. In addition to and without limitation of any exclusions or limitations of liability of Signify and its group of companies as set forth in any agreement for sale, distribution or otherwise making available of UV-C battens, Signify and its group of companies shall have no responsibility or liability whatsoever for any claim or damage that may arise from or relate to any use of UV-C battens outside of their intended use or contrary to their installation and operation instructions, each as described under Applications, the user manual and/or mounting instruction.
        Downloads
        Leaflets
        Visuals
        • Check a product to add
           
        • Check a product to add
           
        • Check a product to add
           
        Check a product to add

        Cannot find what you're looking for?
        Perhaps one of these links might help

        Contact us   
        Distributor or partner finder