HF-Performer Intelligent for TL5 HE/HO lamps

For flexibility in luminaire design and stock-keeping management

Popular downloads

Products

Product	Compare
HF-Pi 1 28/35/49/54 TL5 EII 220-240V 913700624166	Product leaflet PDF Where to buy
HF-Pi 2 14/21/24/39 TL5 EII 220-240V 913700624266	Product leaflet PDF Where to buy
HF-Pi 3/4 14/24 TL5/PL-L EII 220-240V 913700657666	Product leaflet PDF Where to buy
HF-Pi 2 28/35/49/80 TL5 EII 913700652666	Product leaflet PDF Where to buy
HF-Pi 2 28/35/49/54 TL5 EII 220-240V 913700624366	Product leaflet PDF Where to buy
HF-Pi 1 28/35/49/80 TL5 EII 913700652566	Product leaflet PDF Where to buy

6 items

Description

HF-Performer Intelligent for Master and ECO TL5 HE/HO, TL-D and PL-L lamps. HF-Performer Intelligent features automatic recognition of the connected lamp and is independently able to adjust its operation parameters exactly to the respective lamp. This results in a substantial benefit, especially for T5 lamps, as it means TL5 HE and HO lamps of the same length can be interchanged. With a choice of seven ballasts, the customer is able to handle efficiently every possible combination of Master TL5 and Eco, TL-D, and PL-L lamps. The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum ClassⅠand need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.

Benefits

Maximum reliability in system operation, and flexibility for designers, operators and facility managers in terms of stock-keeping management
Multi-power technology for precise operation of multiple lamp types of various wattages
Optimized for high maintenance efficiency and reliability: 5-year warranty

Features

Highest CELMA Energy Efficiency Index A2 BAT
Complies with CE, ENEC, EL, VDE-EMC, CCC marks of conformity
Average nominal service lifetime over 100,000 hours (at Ta 50 °C) with a failure rate ≤ 0.1 % per 1,000 hours
Optimized lamp preheating for a minimum of 50,000 On/Off switch operations without lamp replacement

Applications

Suitable for DC operation and emergency lighting installations; full compliance with requirements for emergency lighting according to EN 61347-2-3-annex J, Extended lamp life in frequent-switching applications, e.g. where occupancy sensors or motion detectors are used, For luminaires of protection class I and protection class II used in office buildings, hospitals, supermarkets, department stores, industrial premises and schools