Thanks to the GreenSpace Accent family, retailers and building operators can enjoy the superior quality of light and market leading energy efficiency of PerfectAccent optics for a reasonable initial investment. The new PerfectAccent optics also provide sparkle on the merchandise and improve shopper eye comfort. GreenSpace Accent Projector can seamlessly integrate on 3C- and DALI-tracks, Coreline Trunking and Maxos fusion. Installation and repositioning is quick and easy and requires no additional tools. For fashion and food retailers, GreenSpace Accent Projector is available with special LED flavors and Fresh food LED recipes to show the merchandize in the very best light. Check out our Fashion and Food catalogue pages to find out more about PremiumWhite, PremiumColor, Fresh Meat, Rosé, Frost and Champagne.
Clean, robust and neutral design
Increased sparkle and shopper eye comfort with PerfectAccent optics
High energy efficiency, maintained over the full lifetime of the product
Toolless installation and repositioning on Track (ST321T), Coreline trunking (ST321Y; a double spothead version) or Maxos fusion (ST321S)
Available with a high flux up to 4900lm, a wide range of optics, optional front glass and barndoor accessories
Retail LED flavors and Fresh food LED recipes included
Very broad aiming flexibility, including upward lighting
Available for normal mains (PSU), simple DALI dimming (PSD), Interact compatible DALI (DIA) and Indoor positioning (DIA-VLC)
Compatible with Interact Retail store and multisite
Compatible with Interact Retail indoor navigation
Warning & Safety
All photometrical data is calculated without optional front glass. Flux should be reduced by 3.5% when using a front glass
Cleaning of the optic is only allowed with pressurized air. Touching the LED or reflector is forbidden. For food preparation areas and areas with high levels of dust, the use of the optional front glass is strongly advised, as it can be cleaned with a (dry) microfiber cloth.
During manipulation and/or maintenance, the product has to be switched off and cooled down
The product must be installed out of arm’s reach. Manipulating the product when hot is only possible with an insulating glove