More brands from

    Close filters Show filters
    Show more filters
    Show less filters
    • Product
    • Wattage
    • Luminous flux
    • IES
    • Leaflet

    Sort by:

        Product family information

        This TL-D lamp has a protective coating that keeps glass and lamp components together in the event of accidental breakage. The lamp is easily identifiable by a blue ring at one end. Application areas are all places where glass shatters can disturb operations and can have an impact on product and people safety, e.g. the food and beverage industry. The lamp has a Teflon coating . It is compliant with HACCP regulations.

        Benefits

        Special protective coating around the lamp prevents products from contamination in case of accidental lamp breakage, easily recognized in audit situation by one blue ring at one end
        The protective coating has a high temperature-resistance and no degradation to be expected under influence of temperature or UV within specified lamp life (50% failures @ 3 hrs switching cycle)
        Makes luminaires compliant with relevant standards in the industry, such as HACCP, ISO 22000 and IEC 61549

        Features

        Protective coating (Surlyn) around the lamp, indicated by two blue rings at one lamp end. This lamp is NOT meant for application in closed luminaires
        Fully compliant with IEC 61549 - Fragment Retention Lamp Standard and with relevant standards in the food industry, such as HACCP and ISO 22000
        No degradation under influence of temperature or UV
        Coating blocks 90 % of UV emission of the lamp
        Fully recyclable, including the protective lamp coating
        Relatively high efficacy, both initially and during lamp lifetime, with high lumen maintenance

        Applications

        For use where contamination resulting from lamp breakage must be prevented, e.g. in food preparation, health care, pharmaceuticals, cleanrooms etc.
        Suitable for use in environments with increased risk of breakage, e.g. sports halls
        Suitable for use in environments where UV emission should be reduced (museums, libraries, archives, food industry, fashion shops, etc.)

        Warning & Safety

        Not suitable for closed luminaires (as indicated by two blue rings)
        Recommended use in combination with self-stopping lamp control system
        A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
        In order to ensure the integrity of the coating, it is strongly recommended to replace Secura lamps before or at the moment the specified lamp life (50% failures @ 3 hrs switching cycle) is reached.
        Downloads
        Leaflets
        Visuals
        • Check a product to add
           
        • Check a product to add
           
        • Check a product to add
           
        Check a product to add

        Cannot find what you're looking for?
        Perhaps one of these links might help

        Contact us   
        Distributor or partner finder