By selecting the right dimmer for the different lamp types, an unlimitednumber of combinations of dimmer units can be chosen to work together in one project. Utilizing the very latest inmicroprocessor technology, every Dynalite dimmer has many built-in dedicated features for the lighting control industry.
The Philips Dynalite range of multipurpose controllers allowscustomization of output types via different output module units. When using DIN-rail multipurpose controllers, a specific type of control can be chosen for each circuit: relay, leading-edge dimmer, trailing-edge dimmer, ballast control, controller with out-of-the-box functionality, fan control, and blind/screen control.
The Philips Dynalite range of multipurpose controllers allowscustomization of output types via different output module units. When using DIN-rail multipurpose controllers, a specific type of control can be chosen for each circuit: relay, leading-edge dimmer, trailing-edge dimmer, ballast control, controller with out-of-the-box functionality, fan control, and blind/screen control.
Philips Dynalite supports a wide selection of dimmer units that are compatible with most lamp types. By selecting the right dimmer for the different lamp types, an unlimitednumber of combinations of dimmer units can be chosen to work together in one project. Utilizing the very latest inmicroprocessor technology, every Dynalite dimmer has many built-in dedicated features for the lighting control industry.
Available in both DIN-rail and wall-box configurations, this Philips Dynalite solution enables a vast range of relay controllers with a variety of circuit numbers and sizes to work individually or as part of a system, thus fulfilling any project requirement. Each device can store over 170 presets, allowing the recall of complex switching logic from simple network messages.
ActiLume 1-10 V can be connected to the 1-10 V DC control input of an HF-R ballast. ActiLume 1-10 V is calibrated for use in a standard office situation.
The Philips ActiLume lighting control system consists of a small, lightweight sensor and controller designed for easy integration into luminaires. ActiLume is a true plug & play solution for open-plan (up to 34 luminaires) or cell offices (e.g. 4 luminaires). Used in a master-and-slave luminaire concept, easy to use and easy to install.
ActiLume (Micro)LuxSense is connected to the 1-10 V DC control input of the HFR ballast. It dims light down close to the minimum level of the ballast. ActiLume MicroLuxSense is calibrated for use in a standard office situation with 600 lux installed and 500 lux required.
The ActiLume Wireless 1-10 V system can work together with OccuSwitch Wireless devices.Wireless luminaires with the ActiLume Wireless 1-10 V system share occupancy information and switch off when all sensors detect no presence.The ActiLume 1-10 V sensor offers daylight savings to the connected wireless Switch Boxes.
Luminaire Based Accessories cover a generic range of products which can be used to extend functionality and/or simplify the design-in of our luminaire based systems.
The OccuSwitch is a movement detector with a built-in switch. It will switch the lights off in a room or area when it is vacated and thus save up to 30% on electricity The OccuSwitch can switch any load of up to 6 A and control an area of between 20 and 25 m2.
OccuSwitch DALI is a combined sensor and controller and will dim and switch the lights in a room or area upon occupancy and according to the available daylight, with options for local override, parallel operation and network links to Building Management Systems (BMS).Can control up to 15 DALI luminaires and is easy to install, requires limited commissioning, if any.
A wide range of wireless sensors with movement detection to control an area of 20-25 m2. Battery-operated, with a typical lifetime of 8-10 years.The actuator can switch any load up to 6 A and can be located in the ceiling or corridor. OccuSwitch Wireless will switch the lights off in a room or area when it is vacated and so save up to 30% on electricity.
Indoor lighting control accessories cover all the user interfaces, sensors, cables, dimmers and other accessories that can be used with our control systems or stand-alone with our lighting systems. The performance and capabilities of the products vary according to the system they are connected to.
Luminaire based, stand-alone controller for magnetic ballasts up to 600 W. Suitable for outdoor applications like roads, streets, residential and area lighting.Step-dim schedule is created using 5 dip switches, dim schedule is flexible between 4 and 9 hours around the midpoint of the night.
Philips Dynadimmer is a flexible standalone control to reduce energy consumption for outdoor lighting. High light levels are only needed at peak hours to maintain safety but light levels can be dimmed at off-peak hours to save energy. Lower light levels help to reduce energy cost and carbon dioxide footprint. In addition, dimming street lights in residential areas improves the quality of life by reducing light pollution levels.Dynadimmer and Dynadimmer SELV can be programmed using Windows PC or Android smart devices.
For public spaces
Beautifully designed and intelligently managed public lighting helps communities prosper by revitalizing neighborhoods, attracting visitors, and giving tourists and residents alike a feeling of security. A comprehensive lighting plan can differentiate a city, making it a valued destination while helping . . .
For office and industry
Lighting in offices and industrial spaces has a profound effect on the well-being, productivity, and worker vitality. Effectively lit and attractive environments enhance your image, help you recruit and retain high-value employees, and increase the total value of your facility . . .
Retail and hospitality
With connected lighting experiences you can attract and engage your customers in
