HF-Regulator Intelligent Touch DALI for TL5/TL-D/PL-L lamps

Dimming the next step in energy saving

Popular downloads

Products

Product	Compare
HF-Ri TD 2 28/35/49/54 TL5 E+ 195-240V 913700695866	Product leaflet PDF Where to buy
HF-Ri TD 4 14/24 TL5 E+ 195-240V 913700679166	Product leaflet PDF Where to buy
HF-Ri TD 1 14/21/24/39 E+ 913700698366	Product leaflet PDF Where to buy
HF-Ri TD 3 14/24 TL5 E+ 195-240V 913700679066	Product leaflet PDF Where to buy
HF-Ri TD 2 14/21/24/39 E+ 913700698466	Product leaflet PDF Where to buy
HF-Ri TD 1 28/35/49/54 TL5 E+ 195-240V 913700695666	Product leaflet PDF Where to buy

6 items

Description

This intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum ClassⅠand need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.

Benefits

Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution
HF operation improves light quality and lamp lifetime.
Compliant with European and Asian norms and suitable for emergency lighting systems

Features

HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly
Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life
Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100%
Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement
Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in time

Applications

Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)