You are now visiting our Global professional lighting website, visit your local website by going to the USA website
You are now visiting the Philips lighting website. A localized version is available for you.
    • Most reliable standard, energy-efficient solution

      HF-S 218/236 TL-D II 220-240V 50/60Hz
      HF-S 218/236 TL-D II 220-240V 50/60Hz
      HF-Selectalume II for TL-D lamps

      HF-S 218/236 TL-D II 220-240V 50/60Hz

      Order code: 913713032466

      Full Product Code: 872790090553300

    Specifications Show all

    General Information
    Application Code
    Type Version
    Lamp Type
    Number of Lamps
    2 piece/unit
    Number of Products on MCB (16A Type B) (Nom)
    Automatic Restart
    Operating and Electrical
    Input Voltage
    220 to 240 V
    Input Frequency
    50 to 60 Hz
    Operating Frequency (Nom)
    45 kHz
    Crestfactor (Nom)
    Power Factor 100% Load (Nom)
    Preheat Time
    1.6 s
    Mains Voltage Performance (AC)
    Mains Voltage Safety (AC)
    Earth Leakage Current (Max)
    0.5 mA
    Inrush Current Width
    0.35 ms
    Ballast Factor (Nom)
    Power Losses (Nom)
    4.6 W
    Inrush Current Peak (Max)
    18 A
    Efficiency at full load [%]
    91.9 %
    Connector Type Input Terminals
    WAGO 744 connector
    Cable Capacity Output Wires Mutual (Max)
    200 pF
    Connector Type Output Terminals
    WAGO 744 connector  [ Suitable for manual wiring]
    Cable Length Hot Wiring
    0.75 m
    Wire Striplength
    8.0-9.0 mm
    Dual Fixture Master/Slave
    Possible, lamp wires 2m max. length  [ Master/Slave operation possible]
    Input Terminal Cross Section
    0.50-1.50 mm²
    Output Terminal Cross Section
    0.50-1.50 mm²
    Cable Capacity Cold Output Wires - Earth (Max)
    200 pF
    Cable Capacity Hot Output Wires - Earth (Max)
    200 pF
    System characteristics
    Rated Ballast-Lamp Power
    36/18 W
    Rated Lamp Power on TL-D
    36/18 W
    System Power on TL-D
    70.4/37.7 W
    Lamp Power on TL-D
    63.9/32.9 W
    Power Loss on TL-D
    6.5/4.8 W
    Rated Lamp Power on PL-L
    36 W
    System Power on PL-L
    66.7 W
    Lamp Power on PL-L
    61.2 W
    Power Loss on PL-L
    5.5 W
    T-Ambient (Max)
    55 °C
    T-Ambient (Min)
    -20 °C
    T-Storage (Max)
    80 °C
    T-Storage (Min)
    -40 °C
    T-Case Lifetime (Nom)
    75 °C
    T-Case Maximum (Max)
    75 °C
    Mechanical and Housing
    L 280x30x28
    Emergency Operation
    Nominal Light Output After 60 Seconds
    100% of EBLF
    Normal Operating Voltage (DC)
    220-240 V
    Battery Voltage Guaranteed Operation
    176-275 V
    Battery Voltage Guaranteed Ignition
    186-275 V
    Emergency Ballast Lumen Factor (EBLF) (Nom)
    100 %
    Nominal Light Output After 5 Seconds
    50% of EBLF
    Approval and Application
    Energy Efficiency Index
    A2 BAT
    IP Classification
    IP 20  [ Ingress Protection 20]
    EMI 9 kHz ... 30 MHz
    Vibration Standard
    IEC68-2-6 F c
    Bumps Standard
    IEC 68-2-29 Eb (10G/16ms)
    Approval Marks
    CE marking
    ENEC certificate
    CCC certificate
    C-Tick certificate
    PSB certification
    TISI marking
    SIRIM approval
    CB Certificate
    CCC certificate
    VDE-EMV certificate
    Hum And Noise Level
    < 30 dB(A)
    Product Data
    Full product code
    Order product name
    HF-S 218/236 TL-D II 220-240V 50/60Hz
    EAN/UPC - Product
    Order code
    Numerator - Quantity Per Pack
    Numerator - Packs per outer box
    Material Nr. (12NC)
    Net Weight (Piece)
    0.193 kg
    Installation Diagrams
    HF-S 218/236 TL-D II 220-240V 50/60Hz
    HF-S 218/236 TL-D II 220-240V 50/60Hz
    2 Lamps
    2 Lamps

    Recently Viewed

    • Check a product to add
    • Check a product to add
    • Check a product to add
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder