You are now visiting our Global professional lighting website, visit your local website by going to the USA website
You are now visiting the Philips lighting website. A localized version is available for you.
    • An energy-efficient solution

      HF-P 1/226 PL-T/C  III 220-240V
      HF-P 1/226 PL-T/C  III 220-240V

      HF-P 1/226 PL-T/C III 220-240V

      Order code: 913700648866

      Full Product Code: 872790083423900


      Size:871.2 kB

      See all downloads

    Specifications Show all

    General Information
    Application Code
    Lamp Type
    Number of Lamps
    2 piece/unit
    Number of Products on MCB (16A Type B) (Nom)
    Automatic Restart
    Operating and Electrical
    Input Voltage
    220 to 240 V
    Input Frequency
    50 to 60 Hz
    Operating Frequency (Max)
    - kHz
    Operating Frequency (Min)
    42 kHz
    Operating Frequency (Nom)
    45 kHz
    Ignition Method
    Warm Start
    Crestfactor (Max)
    Power Factor 100% Load (Nom)
    Ignition Time (Max)
    0.65 s
    Mains Voltage Performance (AC)
    Mains Voltage Safety (AC)
    Earth Leakage Current (Nom)
    0.5 mA
    Inrush Current Width
    0.250 ms
    Constant Wattage Deviation
    Ballast Factor (Nom)
    Power Losses (Nom)
    4.25-3.59 W
    Inrush Current Peak (Max)
    18 A
    Connector Type Input Terminals
    Cable Capacity Output Wires Mutual (Nom)
    100 pF
    Connector Type Output Terminals
    Cable Length From Device to Lamp
    1 m
    Cable Length Hot Wiring
    1 m
    Wire Striplength
    8.5-9.5 mm
    Dual Fixture Master/Slave
    Not applicable  [ Master/Slave oper. not applicable]
    Input Terminal Cross Section
    0.50-1.50 mm²
    Output Terminal Cross Section
    0.50-1.50 mm²
    Cable Capacity Output Wires to Earth (Nom)
    100 pF
    System characteristics
    Rated Ballast-Lamp Power
    26 W
    Rated Lamp Power on PL-T/C
    2x26/26 W
    System Power on PL-T/C
    50.6/27.2 W
    Power Loss on PL-T/C
    5.63/3.61 W
    Lamp Power on PL-T/C
    45/23.63 W
    T-Ambient (Max)
    50 °C
    T-Ambient (Min)
    -25 °C
    T-Storage (Max)
    80 °C
    T-Storage (Min)
    -40 °C
    T-Case Lifetime (Nom)
    75 °C
    T-Case Maximum (Max)
    75 °C
    T-Ignition (Max)
    50 °C
    T-Ignition (Min)
    -25 °C
    Mechanical and Housing
    S 103x67x30
    Emergency Operation
    Nominal Light Output After 60 Seconds
    100% of EBLF
    Battery Voltage Lamp Ignition
    198-254 V
    Normal Operating Voltage (DC)
    220-240 V
    Battery Voltage Lamp Operation
    Battery Voltage Guaranteed Operation
    176-275 V
    Battery Voltage Guaranteed Ignition
    186-275 V
    Nominal Light Output After 5 Seconds
    50% of EBLF
    Approval and Application
    Energy Efficiency Index
    A2/A2 BAT
    IP Classification
    IP 20  [ Ingress Protection 20]
    EMI 9 kHz ... 30 MHz
    Safety Standard
    IEC 61347-2-3
    Performance Standard
    IEC 60929
    Quality Standard
    ISO 9000:2000
    Environmental Standard
    ISO 14001
    Harmonic Current Emission Standard
    IEC 61000-3-2
    EMC Immunity Standard
    IEC 61547
    Vibration Standard
    IEC68-2-6 F c
    Bumps Standard
    IEC 68-2-29 Eb
    Humidity Standard
    EN 61347-2-3 clause 11
    Approval Marks
    CE marking
    ENEC certificate
    VDE-EMV certificate
    Temperature Marking
    Emergency Standard
    IEC 60598-2-22
    Hum And Noise Level
    Product Data
    Full product code
    Order product name
    HF-P 1/226 PL-T/C III 220-240V
    EAN/UPC - Product
    Order code
    Numerator - Quantity Per Pack
    Numerator - Packs per outer box
    Material Nr. (12NC)
    Net Weight (Piece)
    0.130 kg
    Installation Diagrams
    HF-P 1/226 PL-T/C  III 220-240V
    HF-P 1/226 PL-T/C III 220-240V

    Recently Viewed

    • Check a product to add
    • Check a product to add
    • Check a product to add
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder