You are now visiting our Global professional lighting website, visit your local website by going to the USA website
You are now visiting the Philips lighting website. A localized version is available for you.
Suggestions
    • Dimming the next step in energy saving

      HF-Ri TD 280 TL5/PL-L E+ 220-240V
      HF-Ri TD 280 TL5/PL-L E+ 220-240V
      HF-Regulator Intelligent Touch DALI for TL5/TL-D/PL-L lamps

      HF-Ri TD 280 TL5/PL-L E+ 220-240V

      Order code: 913700609666

      Full product code: 871150091067730

      Downloads

      Spec Sheet
      Size:544.3 kB

      See all downloads

    Specifications Show all

    General information
    Application Code
    E+
    Type Version
    mk1
    Lamp Type
    TL5/PL-L
    Number of Lamps
    2 piece/unit
    Number of Products on MCB (16A Type B) (Nom)
    9
    Automatic Restart
    Yes
    Operating and electrical
    Input Voltage
    220 to 240 V
    Input Frequency
    50 to 60 Hz
    Operating Frequency (Max)
    - kHz
    Operating Frequency (Min)
    - kHz
    Ignition Method
    Warm Start
    Crestfactor (Max)
    1.7
    Power Factor 100% Load (Nom)
    0.95
    Ignition Time (Max)
    0.2 s
    Mains Voltage Performance (AC)
    -8%-+6%
    Mains Voltage Safety (AC)
    -10%-+10%
    Earth Leakage Current (Max)
    0.5 mA
    Inrush Current Width
    0.35 ms
    Standby Power Consumption (Max)
    0.25 W
    Ballast Factor (Nom)
    1.0
    Power Losses (Nom)
    11.3 W
    Inrush Current Peak (Max)
    35 A
    Efficiency at full load [%]
    93.43 %
    Wiring
    Connector Type Input Terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Cable Capacity Output Wires Mutual (Max)
    150 pF
    Connector Type Output Terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Connector Type Control Input Terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Wire Striplength
    8.0-9.0 mm
    Dual Fixture Master/Slave
    -  [ not specified]
    Control Input Terminal Cross Section
    0.50-1.00 mm²
    Input Terminal Cross Section
    0.50-1.00 mm²
    Output Terminal Cross Section
    0.50-1.00 mm²
    Auto Insert (ALF/ADS) Wire Cross Section
    0.5 mm²
    Cable Capacity Output Wires to Earth (Max)
    150 pF
    System characteristics
    Rated Ballast-Lamp Power
    80 W
    Temperature
    T-Ambient (Max)
    50 °C
    T-Ambient (Min)
    15 °C
    T-Storage (Range)
    -40 °C to 80 °C
    T-Storage (Max)
    80 °C
    T-Storage (Min)
    -40 °C
    T-Case Lifetime (Max)
    75 °C
    T-Case Maximum (Max)
    75 °C
    Stable Lamp Operation Temperature
    Not Specified
    T-Ignition (Max)
    50 °C
    T-Ignition (Min)
    0 °C
    Controls and dimming
    Control Interface
    TD
    Regulating Level Power
    1%-100%
    Control Input Protection
    Yes (Basic insulation)
    Mechanical and housing
    Housing
    L 425x30x21
    Emergency operation
    Battery Voltage Lamp Ignition
    220 V
    Battery Voltage Lamp Operation
    154-276
    Approval and application
    Energy Efficiency Index
    A1
    IP Classification
    IP20  [ Finger-protected]
    EMI 9 kHz ... 30 MHz
    EN55015
    EMI 30 MHz ... 1000 MHz
    EN55022 level B
    Safety Standard
    IEC 61347-2-3
    Performance Standard
    IEC 60929
    Quality Standard
    ISO 9000:2000
    Environmental Standard
    ISO 14001
    Harmonic Current Emission Standard
    IEC 61000-3-2
    EMC Immunity Standard
    IEC 61547
    Vibration Standard
    IEC68-2-6 F c
    Bumps Standard
    IEC 68-2-29 Eb
    Humidity Standard
    EN 61347-2-3 clause 11
    Approval Marks
    EMC
    CE marking
    ENEC certificate
    CCC certificate
    Temperature Marking
    Yes
    Emergency Standard
    IEC 60598-2-22
    Hum And Noise Level
    30 dB(A)
    Application conditions
    Ambient temperature range
    15 °C to 50 °C
    Product data
    Full product code
    871150091067730
    Order product name
    HF-Ri TD 280 TL5/PL-L E+ 220-240V
    EAN/UPC - Product
    8711500910677
    Order code
    913700609666
    Numerator - Quantity Per Pack
    1
    Numerator - Packs per outer box
    12
    Material Nr. (12NC)
    913700609666
    Net Weight (Piece)
    0.417 kg
    Installation diagrams
    HF-Ri TD 280 TL5/PL-L E+ 220-240V
    HF-Ri TD 280 TL5/PL-L E+ 220-240V
    HF-R TD 2 lamps TL5/PL-L/TL-D
    HF-R TD 2 lamps TL5/PL-L/TL-D
    HF-R TD 2 lamps PL-L
    HF-R TD 2 lamps PL-L
    Downloads
    Leaflets
    Visuals

    Recently viewed

    • Check a product to add
       
    • Check a product to add
       
    • Check a product to add
       
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder