Cannabis is a light-loving crop. Light levels up to 1000 mmol/m2/s in indoor facilities are fairly common. However, with the use of grow lights at the top of the greenhouse or indoors, that light is only accessible at the highest part of the crop because of the density of the leaves of the plant. Intercanopy lighting spreads the light more evenly over the canopy and in the middle part of the crop which increases flower development.
Higher, better quality yield with intercanopy lighting in medical cannabis cultivation
How does intercanopy LED work for your cannabis crop?
The visual shows that the top layer of the canopy absorbs most of the daylight and/or toplighting and the light level quickly decreases further downwards in the crop. This typically results in smaller flowers and slower maturity, which is disadvantageous to the potency development lower in the canopy and therefor influences the total crop quality.
Light distribution over the crop combining LED toplighting + LED interlighting
Inspired by the scientific study of Haley et al 2018, growers using Signify LED interlighting aim to get a more uniform cannabinoid profile*. The use of Philips LED interlighting has led to a more uniform flower and potency development in the lower part of the canopy. Besides, it raises the total production due to better flower development over the total height of the plant, which then results in a higher total yield by raising the quality of the flowers lower in the canopy. Intercanopy lighting can easily be combined with either HPS or Philips LED toplighting.
Interlighting can be implemented as an additional lighting source in current existing Cannabis cultivation setups. Quick and easy installation makes it possible to run the lights in your next crop cycle.
The following test setup has been executed under practical circumstances bringing the following results on difference between HPS and the hybrid system HPS with interlighting.
Research benefits of LED interlighting
Through research in customer production facilities, we have seen a big impact of using LED interlighting in the cannabis crop. Not only have we noticed that the leaves look healthier, but also have we seen that the leaves stay healthier throughout the cycle of the crop. This directly drives photosynthesis and results in a more efficient production. Second, we’ve measured a higher dry flower weight; the crop with HPS ended up at 0.27 gram/mol* and HPS + interlighting ended up at 0.37 gram/mol*. And third, due to the healthier leaves, 30% less crop maintenance could be achieved as significant less de-leafing was required.
Comparison HPS only and HPS + LED intercanopy lighting
* Gram/mol = Efficiency of the lighting = total dry flower weight / accumulated mols during flowering cycle
More ‘A’ class flowers & higher THC levels
The quality of the medical cannabis crop is measured on a couple of characteristics. One of them being the amount of A, B or C class flowers, with A being the best. Throughout the trial we have measured the dry flowers from the crop; how many flowers could we grow in class A, B or C. A big differences were seen between the HPS crop and the HPS + LED interlighting crop. The traditional system with HPS produced a mixture of A, B and C class flowers. The hybrid system produced mainly A class flowers. And second, next to the larger amount of A class flowers, we’ve also seen an increase on compound level. The hybrid lighting setup including the LED interlighting shows a 5% higher THC value (sampled on a mixture of flowers from top to bottom) compared to the HPS.
Proven results with LED interlighting
Intercanopy lighting serves to bring light in the lower, darker areas of the crop, spreading the light more evenly over the canopy. Medicinal cannabis growers are now experiencing the value of intercanopy lighting as well. Intercanopy lighting has already proven itself for high-wire tomato and cucumber production with hundreds of hectares sold worldwide.
Esther de Beer is Program Manager of Pre-development and Research at Philips Horticulture LED Solutions. She spends her days trying to make LED grow lights more effective. In this series of articles she explains the basics of how light works and how it affects plant growth.
*Hawley, D., Graham, T., Stasiak, M., Dixon, M., 2018. Improving Cannabis Bud Quality and Yield with Subcanopy Lighting. HortScience 53, 1593–1599. https://doi.org/10.21273/HORTSCI13173-18
Why grow with LED?
High sustainable production
Growing your cannabis with the use of LED will generate higher yield per square meter compared to growing with other light sources. The right light optimizes photosynthesis and flower production and improves your numbers. Furthermore it uses the lowest possible energy input with a maximum production per Watt, a minimal use of water and nutrients, and a great working environment.
Raise the quality and predictability of your cannabis crop.
By using LED light, the climate in your greenhouse or sole source facility can be controlled more easily. LED light comes with hardly any heat; thus the climate can be steered more easily. This results in consistent quality with the right composition of compounds; the same quantity year-round to simplify logistical planning and guarantee reliable manufacturing.
By using a dedicated light recipe for cannabis, plant characteristics can be steered. You can steer certain specific compounds meeting your customers requirement and differentiate yourself in the market.
Related articles
Contact us
Contact certified partners
Philips products are sold through a global network of certified partners. Find partners in your region for more information about Philips LED grow lights.
Contact Philips
What are the best LED grow lights for your situation? We are here to help. Please use our form to submit your request.
Interested?
Learn more about LED lighting in horticulture by reading our latest articles and case studies.