| Lamp family code | LED109
[ LED module 10900 lm] |
||
| Light source color | 740 neutral white
|
||
| Light source replaceable | Yes
|
||
| Number of gear units | 1 unit
|
||
| Driver/power unit/transformer | Power supply unit regulating
|
||
| Driver included | Yes
|
||
| Optical cover/lens type | Flat glass
|
||
| Luminaire light beam spread | 48° x 66°
|
||
| Control interface | -
|
||
| Connection | Push-in connector 5-pole
|
||
| Cable | Cable 15 m without plug
|
||
| Protection class IEC | Safety class II
|
||
| Flammability mark | -
|
||
| CE mark | CE mark
|
||
| ENEC mark | ENEC mark
|
||
| Warranty period | 5 years
|
||
| Optic type outdoor | Distribution medium 11
|
||
| Remarks | *-Per Lighting Europe guidance paper “Evaluating performance of LED based luminaires - January 2018”: statistically there is no relevant difference in lumen maintenance between B50 and for example B10. Therefore the median useful life (B50) value also represents the B10 value.
|
SR compatibility: Luminaire prepared for SR drivers and socket, offering a standardized futureproof platform for connectivity and sensors. For SR based luminaires only SR Certified components/sensors are to be used (see also: http://www.lighting.philips.co.uk/oem-emea/products/driving-connected-lighting) . Functional compatibility of 2 (SR certified) components/sensors to be used in combination as well as override possibility of any lineswitch function used in a SR based luminaire, is to be released by the master component/sensor supplier. For the use of NEMA 7pin socket on a SR based luminaire a full system verification is required. Not following these advises can/will cause risk of damage and non-compliance for which Signify cannot take any responsibility.
|
* At extreme ambient temperatures the luminaire might automatically dim down to protect components
|
| Constant light output | Yes
|
||
| Number of products on MCB of 16 A type B | 6
|
||
| RoHS mark | RoHS mark
|
||
| Light source engine type | LED
|
||
| Product family code | BGP307
[ ClearWay gen2] |
| Upward light output ratio | 0
|
| Standard tilt angle posttop | 0°
|
| Standard tilt angle side entry | 0°
|
| Input Voltage | 220 to 240
V
|
| Input Frequency | 50 to 60
Hz
|
| Initial CLO power consumption | 60
W
|
| Average CLO power consumption | 63
W
|
| End CLO power consumption | 66
W
|
| Inrush current | 65
A
|
| Inrush time | 0.330
ms
|
| Power Factor (Min) | 0.97
|
| Dimmable | Yes
|
| Housing Material | Aluminum die-cast
|
| Reflector material | -
|
| Optic material | Polycarbonate
|
| Optical cover/lens material | Tempered glass
|
| Fixation material | Aluminum
|
| Mounting device | Universal for diameter 48 to 60 mm adjustable
|
| Optical cover/lens shape | Flat
|
| Optical cover/lens finish | Clear
|
| Overall length | 480
mm
|
| Overall width | 325
mm
|
| Overall height | 150
mm
|
| Effective projected area | 0.1151
m²
|
| Ingress protection code | IP66
[ Dust penetration-protected, jet-proof] |
| Mech. impact protection code | IK08
[ 5 J vandal-protected] |
| Surge Protection (Common/Differential) | Philips standard surge protection level
|
| Initial luminous flux (system flux) | 8428
lm
|
| Luminous flux tolerance | +/-7%
|
| Initial LED luminaire efficacy | 143
lm/W
|
| Init. Corr. Color Temperature | 4000
K
|
| Init. Color Rendering Index | 70
|
| Initial chromaticity | (0.38, 0.38) SDCM <5
|
| Initial input power | 66
W
|
| Power consumption tolerance | +/-11%
|
| Ambient temperature range | -40 to +50 °C
|
| Maximum dim level | 0% (digital)
|
| Full product code | 871869944978000
|
| Order product name | BGP307 LED109-4S/740 II DM11 CLO-DDF2 D1
|
| EAN/UPC - Product | 8718699449780
|
| Order code | 910925865713
|
| Numerator - Quantity Per Pack | 1
|
| Numerator - Packs per outer box | 1
|
| Material Nr. (12NC) | 910925865713
|
| Net Weight (Piece) | 6.820
kg
|
