View all 12 products

FlowStar – LED tunnel entrance and point-source interior lighting

FlowStar

  • Name

    Product family information

    Tunnel operators are looking for an LED solution for both interior and entrance lighting that delivers cost, safety and availability benefits over the full lifetime of the product. FlowStar’s stainless-steel modular build and dedicated LED design provide a long-lasting and efficient LED alternative to conventional HPS lighting. FlowStar can also be combined with our controls and services for the highest levels of performance.

    Benefits

    High lumen output; dedicated tunnel luminaire that can replace HPS entrance lighting
    Long-lasting, highly efficient lighting solution for the whole tunnel
    Easy to install and maintain

    Features

    A lifetime solution for both tunnel entrance and interior lighting in combination with service packages
    Designed for maintenance (modular build and glass cover)
    Can be integrated with controls (e.g. TunneLogic) and services for best system performance
    True point-for-point LED alternative to HPS up to 400 W
    For entrance lighting, it can be combined with the FlowLine linear interior luminaire
    Can compete on Total Cost of Ownership with current HPS solutions within the TotalTunnel approach

    Applications

    Traffic tunnels and underpasses
    Downloads
    Leaflets
    Visuals
    Product family details
    General
    Type
    • BGB300 (ENTRANCE version)
    • BGB310 (INTERIOR version)
    Light source
    • Integral LED-module
    System power
    • BGB300: 79 up to 435 W
    • BGB310: 68 up to 370 W
    Luminous flux
    • BGB300: 9,200 up to 50,000 lm
    • BGB310: 8,200 up to 44,000 lm
    Luminaire efficacy
    • > 100 lm/W
    Correlated Color Temperature
    • 4000 K (neutral white, NW)
    • 5700 K (cool white, CW)
    Color Rendering Index
    • > 70
    Maintenance of lumen output - L80F10
    • > 100,000 hours at 25 ºC
    Operating temperature range
    • -25 to +40 ºC
    Driver
    • Separate (non-self ballasted LED-module)
    Mains voltage
    • 220-240 V / 50-60 Hz
    Dimming
    • DALI or SDU dimmable
    Optic
    • Tunnel asymmetrical (DTA)
    • Tunnel counter-beam (DTCB)
    • Tunnel symmetrical (DTS)
    • Tunnel asymmetrical wide beam (DTA-WB)
    • Tunnel symmetrical wide beam (DTS-WB)
    Optical cover
    • Tempered glass, hard
    Material
    • Housing: stainless steel
    • Heatsink: aluminum
    • Cover: glass, thermally toughened
    Color
    • Not painted stainless steel and anodized aluminum
    Connection
    • Plugs connections or flying lead
    Maintenance
    • Long lasting sealed units easy and fast to exchange
    Installation
    • Ceiling mounted
    • 6 flange mounting clamps included for fast installation and allignment in the horizontal plane
    • Option for plugs connection for plug and play installation
    • Recommended mounting height: > 4 m
    Cable gland
    • Flying lead versions: M20
    • Plug and play version: 2 receptacles for DALI (in and out) and 1 receptacle for power in
    Remarks
    • Separate FlowStar LED units are available (BGB300 and BGB310 with dedicated designations)
    • Separate FlowStar driver units are available (EGB300 and EGB310 with dedicated designations)
    • Separate mounting clamp sets (set of 4 and set of 6 pcs) are available
    • For the versions equiped with connection sockets, cables with matching plugs are available
    • Check a product to add
       
    • Check a product to add
       
    • Check a product to add
       
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder