Selenium LED – simply efficient

Selenium LED

Product family information

Selenium LED is a cost-effective road-lighting luminaire, which delivers over 60% energy saving compared with conventional solutions. Its simple, rounded form reduces its daytime visual impact, allowing it to integrate into any kind of environment.The LEDGINE technology inside the luminaire ensures an efficient and uniform light distribution, covering the widest possible range of applications. And installation and maintenance could not be simpler: connectors and driver are directly accessible, without the use of tools.


Simplicity – limited configurations
Efficient, without compromising on light quality
Easy installation and maintenance


LEDGINE technology inside
Flat glass
Direct access to connectors and driver; no tools required


Roads: intra and inter-urban motorized traffic /major roads
Streets: mixed traffic
Car parks, roundabouts
See all products
Software Plugins
Product family details
  • BGP340
Light source
  • Integral LED-module
Power (+/-10%)
  • 29 to 94 W
Luminous flux
  • 3680 to 11,040 lm
Luminaire efficacy
  • >105 lm/W
Correlated Color Temperature
  • 4000 K
Color Rendering Index
  • > 76
Maintenance of lumen output - L80F10
  • 60,000 hours
Driver failure rate
  • 0,05% per 5000 hours
Operating temperature range
  • -30 to +45 ºC
  • Separate (non-self ballasted LED-module)
Mains voltage
  • 220-240 V / 50-60 Hz
Inrush current
  • 80 A / 150 μS
  • Dynadimmer
  • Mains dimming
  • Dimming via Telemanagement RF
Controls system input
  • 1-10 V and DALI
  • RF Antenne
  • Photocell
  • Constant Light Output (CLO)
  • Nemasocket
  • Mains dimming (D13)
  • Marine salt protected coating (MSP)
  • Surge protection up to 10 kV
  • Stand alone dimming via Dynadimmer (DDF)
  • External dimming: DALI or 1-10 V (D7 or D9)
  • Knife connector (KC)
  • Medium beam
Optical cover
  • Glass, flat
  • Housing: high-pressure, die-cast aluminum
  • Optics: plastic (PC)
  • Gasket: silicone rubber, heat resistant
  • Cover: glass, thermally hardened
  • RAL7035
  • Other RAL colors available on request
  • Wieland
  • Opening by one clip
  • Post top mounting: Ø 60 / 76 mm
  • Side entry mounting: Ø 34 / 60 mm
  • Reversible spigot for side-entry and post-top
  • Recommended mounting height: 5 to 12 m
  • Standard tilt angle post top: 5º
  • Adjustable tilt angle: 0º, 5º and 15º
  • Max SCx: 0.077 m²
  • Check a product to add
  • Check a product to add
  • Check a product to add
Check a product to add

Cannot find what you're looking for?
Perhaps one of these links might help

Contact us   
Distributor or partner finder