Type |
- BPP435 (post-top version)
- BRP435 (side-entry version)
|
Light source |
|
Power |
- Neutral white: 8.7 to 71 W
- Warm white: 10.6 to 77 W
|
Luminous flux (system) |
- Neutral white: 1040 - 9775 lm
- Warm white: 1027 - 8500 lm
|
Luminaire efficacy |
|
Correlated Color Temperature |
- 3000 K (Warm white)
- 4000 K (Neutral white)
|
Color Rendering Index |
- ≥ 70 (Neutral white, 4000 K)
- ≥ 80 (Warm white, 3000 K)
|
Lumen maintenance at median useful life* 100000 h |
|
Control gear failure rate at median useful life 100000 h |
|
Performance Ambient Temperature Tq |
|
Operating temperature range |
|
Driver |
- Built-in (self ballasted LED-module)
|
Mains voltage |
|
Inrush current |
- 22 W driver: 15 A at 295 µs
- SR 22 W driver: 18 A at 320 µs
- 40 W driver: 21 A at 225 µs
- SR 40 W driver: 21 A at 300 µs
- 100 W driver: 45 A at 285 µs
|
Dimming |
- Stand alone DynaDimmer
- DALI
- Mains Dimming
- CM - Group dimming
|
Options |
- Wired for SR (System Ready)
|
Optic |
- Distribution Medium (DM), Wide (DW), Comfort (DC), DistributionRoad Wet (DK), Distribution Narrow (DN), Asymmetric (A), Symmetric (S), Distribution Pedestrian crossing (DP-L & DP-R)
|
Optical cover |
- Thermally hardened glass, flat
|
Material |
- Housing: high-pressure, die-cast aluminum, non-corrosive
- Cover: glass, thermally hardened
|
Color |
- Silver satin grey (SI)
- Philips dark grey (GR)
- Other RAL or AKZO futura colors available on request
|
Maintenance |
- 5 torx screws from below
- The Philips Service tag will help to identify the product and share all product information on the spot
|
Installation |
- Side-entry mounting: lateral entry Ø 42-48 mm
- Post top mounting: Ø 60-76 mm
- Spigot is external
- Recommended mounting height: 6-8 m
- Max SCx: 0.049 m²
|
Remarks |
- Dedicated accessories available for different mounting possibilities
|
SR compatibility |
- Luminaire prepared for SR drivers and socket, offering a standardized futureproof platform for connectivity and sensors.
- For SR based luminaires only SR Certified components/sensors are to be used (see also: http://www.lighting.philips.co.uk/oem-emea/products/driving-connected-lighting).
- Functional compatibility of 2 (SR certified) components/sensors to be used in combination as well as override possibility of any lineswitch function used in a SR based luminaire, is to be released by the master component/sensor supplier.
- For the use of NEMA 7pin socket on a SR based luminaire a full system verification is required. Not following these advises can/will cause risk of damage and non-compliance for which Signify cannot take any responsibility.
|