Element Bollard LED – Marking, punctuating and guiding

Element Bollard LED

Element Bollard LED

  • Element Bollard LED – Marking, punctuating and guiding

    • Angular design
    • Lighting effect on one or two sides
    • Element family look & feel


[trigger to render Video Gallery]


Product family information

With its robust construction and carefully finished details, Element Bollard LED provides guidance and creates ambiance in outdoor environments by marking out and punctuating the space. Element Bollard LED offers a choice of lighting on one or two sides, depending on the effect to be achieved and the urban space being marked out: pedestrian areas, paths, squares, parks, or the surroundings of contemporary buildings.


Available in two sizes
Robust construction
Fine detailing
Uni-directional or bi-directional light distribution


Pedestrian areas, parks, squares, surroundings of contemporary buildings and locations
Product family details
  • BGP706 (small version)
  • BGP707 (big version)
Light source
  • Integral LED-module
  • BGP706: 8 or 13 W
  • BGP707: 13 to 25 W
Luminous flux
  • BGP706: up to 475 lm (4000 K, unidirectional); up to 951 lm (4000 K, bidirectional)
  • BGP707: up to 938 lm (unidirectional); up to 1822 lm (bidirectional)
Luminaire efficacy
  • BGP706: up to 59 lm/W (4000 K, unidirectional); up to 73 lm/W (4000 K, bidirectional)
  • BGP707: up to 72 lm/W (unidirectional); up to 73 lm/W (bidirectional)
Correlated Color Temperature
  • 3000 or 4000 K
Color Rendering Index
  • 80 (3000 K)
  • 70 (4000 K)
Maintenance of lumen output - L80F10
  • 90,000 hours (GreenLine)
  • 50,000 hours (EconomyLine)
Operating temperature range
  • -30 to 25 ºC
  • Built-in (self ballasted LED-module)
Mains voltage
  • 220-240 V / 50-60 Hz
  • Standard road optic for S-class, uni- or bidirectional (SRN)
Optical cover
  • Satinized flat diffuser
  • Bollard: aluminum, extruded
  • Canopy and base plate: cast aluminum
  • Diffuser: polycarbonate
  • Platinum
  • Other RAL or AKZO Futura colors available on request
  • After removing the 2 HC M6 screws of the upper cover the gear tray is directly accessible
  • Fixing of the foot on the floor (Ø 10 mm screw, not supplied)
  • Possible supply of a special system for ‘not even ground’
  • The bollard body is linked to the foot by 2 stainless steel rods (Ø 8 mm)
  • Closing of the bollard by 2 HC M6 screws on the upper cover
  • IP66
  • IK10
  • Two heights versions available: 550 or 850 mm
  • Colour LED (on demand)
  • System for presence detection (automatic lighting on demand)
  • Fixing system for imperfect ground (on demand)

Contact us


For business enquiries regarding any of our professional lighting systems.

You are now visiting our Global professional lighting website, visit your local website by going to the USA website