Eye-catching display effects

ProFlood LED

Product family information

ProFlood LED is a waterproof projector allowing both image projection and creative light framing – a powerful tool that gives display lighting designers great creative freedom. They can adjust the projector's output to precisely match the surroundings or to create a particular effect, virtually 'sculpting' the light.


Exceptionally high-quality output, including advanced control of light distribution and significantly reduced glare
Easy to install and adjust
55W consumption delivering the lumen performance of a 150W CDM lamp


Projection of text, logos, patterns and other images by means of a gobo
Adjustable shutters enable accurate framing of monochrome or color beams
Adjustable beam (from 20° to 40°) to precisely match the surroundings and adjust the focus and uniformity
Long lifetime of 50,000 hours (L80B10 at Ta 25°C)
Anamorphosis: dedicated software makes it possible to calculate the required gobo form to offset the distortion.


Modern and classical buildings, architectural floodlighting
See all products
Product family details
  • BCP608
Light source
  • Integral LED-module
  • 55 W (+/-5 %)
Luminous flux
  • 5590 lm (LED flux)
Correlated Color Temperature
  • 4000 K
Color Rendering Index
  • >70
Useful life
  • 50,000 hours min L80B10 at ta 25 ºC
Operating temperature range
  • -20 to 35 °C
  • Built-in (self-ballasted LED-module)
Power/Data supply
  • Xitanium LED drivers 50W/s
Mains voltage
  • 220-240 V / 50-60 Hz
Inrush current
  • 20 A
  • No
Controls system input
  • No
  • Class I and Class II
  • Marine-salt protected (MSP), 500 hrs
  • Other RAL colors available
  • Module Temperature Protection (NTC)
  • ZoomSpot
  • *Four non-reflecting lenses: beam angle adjustments of 2 x 10º to 2 x 20º (Zoom spot)
  • *Image size (Ø): adjustable by moving the lens along the optical axis
  • *Image focus: adjustable by moving the two lenses along the optical axis
  • *Image uniformity: adjustable by moving the diaphragm (Ø 50 mm) along the optical axis
Optical element
  • Optical lenses set
Optical cover
  • Glass clear, with anti-reflection coating
  • Housing: aluminum casting, ultra-dark grey
  • RAL10714 painting
  • Mains connector access by opening the rear cover by one clip (does not affect the optical settings)
  • No internal cleaning required
  • Outdoor: on mast-head frame/wall or
  • Indoor: on roof or ceiling/wall
  • *U-shaped mounting bracket with foot-print suitable for 3-point fixation by means of M14 bolts
  • Max adjustment from the horizontal: -180 to +180º
  • Max vertical aiming: -90 to +90º
  • Operating temperature: -20
  • Projected area in horizontal position: 0.12 m²
  • *Standing-up or hanging-down mounting
  • *Zoomspot system access by opening the front cannon
  • Mains M20 cable gland that accept cable diameters from 8 mm to 12 mm
  • Mains connection: push-in connector, 3-poles
Cable gland
  • M 20
  • GOBO support (100 mm), shutter, color filter
  • When the Proflood is installed to one side above or below the axis, the projected image without gobo correction become distorted. To overcome this, a specific "ANAMORPHOSIS software" has been designed to calculate the required gobo form to offset the distortion.
  • Special request: CRI 80 |Surge Protection 10 kV| Dimmability with external box
  • Check a product to add
  • Check a product to add
  • Check a product to add
Check a product to add

Cannot find what you're looking for?
Perhaps one of these links might help

Contact us   
Distributor or partner finder