You are now visiting our Global professional lighting website, visit your local website by going to the USA website

More brands from

    • HID-PrimaVision Xtreme for CPO - Xtreme drivers for the highest reliability

      HID-PV Xt 45 CPO C1 208-277V
      HID-PV Xt 45 CPO C1 208-277V

      HID-PV Xt 45 CPO C1 208-277V

      Order code: 913700672966

      Full Product Code: 871829121204100


      Size:890.3 kB

      See all downloads

    Specifications Show all

    General Information
    Lamp Type
    Number of Lamps
    1 piece/unit
    Suitable For Outdoor Use
    Number of Products on MCB (16A Type B) (Nom)
    Default Lamp Selected
    Automatic Restart
    Operating and Electrical
    Input Voltage
    208-240-277 V
    Input Frequency
    50 to 60 Hz
    Minimum Mains Voltage Operation (Min)
    172 V
    Operating Frequency (Nom)
    0.40 kHz
    Power Factor 100% Load (Nom)
    Ignition Voltage (Max)
    5 kV
    Ignition Switch-Off Time (Nom)
    20 min
    Mains Voltage Performance (AC)
    Mains Voltage Safety (AC)
    Earth Leakage Current (Max)
    0.7 mA
    Output Peak Voltage (Max)
    250 V
    Inrush Current Width
    0.24 ms
    Lamp Power Tolerance
    Input Current (Nom)
    0.26 A
    Inrush Current Peak (Max)
    28 A
    Cable Capacity Output Wires Mutual (Nom)
    1000 pF
    Cable Length From Device to Lamp
    10 m
    Wire Striplength
    10.0-11.0 mm
    Ballast Contact Wire Cross Section
    0.50-2.50 mm²
    Connector Type
    WAGO series 804
    System characteristics
    Rated Ballast-Lamp Power
    45 W
    Rated Lamp Power on CPO
    45 W
    System Power on CPO
    51 W
    Lamp Power on CPO
    45 W
    Power Loss on CPO
    6 W
    Power Loss on CPO While Dimming
    4.5 W
    T-Ambient (Max)
    50 °C
    T-Ambient (Min)
    -30 °C
    T-Storage (Max)
    50 °C
    T-Storage (Min)
    -30 °C
    T-Case Lifetime (Nom)
    80 °C
    T-Case Switch Off (Min)
    92 °C
    Controls and Dimming
    Programmable Lamp Settings
    Pre-Set Integrated Controls
    Programmable Dimming Options
    Control Input Protection
    Yes (Basic insulation)
    Regulating Level
    Mechanical and Housing
    Approval and Application
    Surge Protection (Common/Differential)
    EN61547 (L-L 2kV, L-G 4kV), 10 kV TIL
    IP Classification Luminaire
    Active Temperature Protection
    EMI 9 kHz ... 300 MHz
    CISPR 15 ed 7.2
    Safety Standard
    IEC 607, 609, 926, 928  [ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.]
    Quality Standard
    ISO 9000:2000
    Environmental Standard
    ISO 14001
    Harmonic Current Emission Standard
    IEC 61000-3-2
    Vibration Standard
    IEC 68-2-6 Fc (10-150Hz, 2G)
    Bumps Standard
    IEC 68-2-29 Eb (10G/16ms)
    Humidity Standard
    EN 61347-2-12 clause 11
    Approval Marks
    CE marking
    ENEC certificate
    VDE-EMV certificate
    Hum And Noise Level
    < 30 dB(A)
    Product Data
    Full product code
    Order product name
    HID-PV Xt 45 CPO C1 208-277V
    EAN/UPC - Product
    Order code
    Numerator - Quantity Per Pack
    Numerator - Packs per outer box
    Material Nr. (12NC)
    Net Weight (Piece)
    0.950 kg
    Installation Diagrams
    HID-PV Xt CPO C1
    HID-PV Xt CPO C1
    HID-PV Xt CPO C1
    HID-PV Xt CPO C1

    Recently Viewed

    • Check a product to add
    • Check a product to add
    • Check a product to add
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder