View all 6 products

HF-Regulator II for PL-L lamps – Dimming: a next step in energy saving

HF-Regulator II for PL-L lamps

HF-Regulator II for PL-L lamps

  • Name

    Product family information

    High-frequency electronic dimming ballast, using the analog protocol (1-10 V) for PL-L lamps
    The ballast is primarily designed for Indoor application. For outdoor application, the luminaire should be minimum ClassⅠand need to be sufficiently protected against water & dust. The installation should also be guard against any lightening surge or any other necessary electrical protection as deemed in such typical installation & application.


    The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard)
    Compliant with European and Asian norms and suitable for emergency lighting systems
    HF operation improves light quality, lamp lifetime
    Combined with controls, additional energy savings can be achieved


    Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life
    Smart power ensures constant light, independent of mains fluctuations
    Up to 60% reduction in energy consumption by using automatic lighting control systems
    Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement


    Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)
    • Check a product to add
    • Check a product to add
    • Check a product to add
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder