OccuSwitch

  • OccuSwitch - a smart move

    • Energy savings of up to 30% and good pay-back
    • Works with almost all lamp- and luminaire types
    • Easy to install, enables even faster installation by optional Wieland connectors.

Videos

[trigger to render Video Gallery]

Images

Product family information

The OccuSwitch is a movement detector with a built-in switch. It will switch the lights off in a room or area when it is vacated and thus save up to 30% on electricity. The OccuSwitch can switch any load of up to 6 A and control an area of between 20 and 25 m2. A detachable mains connector enables easy installation and mounting of the OccuSwitch in the ceiling

Features

OccuSwitch has a smart timer that will extend the delay time by 10 minutes if movement is detected shortly after switch-off, assuming that the area is still in use but there is very little movement
The OccuSwitch has a retractable shield that can be used to shield off areas, e.g. corridors, adjacent to the area the OccuSwitch is controlling

Applications

Offices, schools (incl. board lighting)
Similar applications, including toilets, storage rooms, etcetera
Designed for recessed ceiling mounting
Surface mounting optional with surface box, possible to install with recessed wiring or a surface-mounted duct
Optimized for ceiling heights of between 2.5 and 4 meters
Product family details
General
Type
  • LRM1000 OS mov det
  • LRM1010 OS mov det small
  • LRM1011 OS mov det small parallel
  • LRM1020 OS mov det corridor
  • LRM1021 OS mov det corridor parallel
  • LRM1030 OS mov det switch 3 wire
  • LRM1031 OS mov det switch 2 wire
  • LRM1035 OS mov det switch 3 wire UK
  • LRM1036 OS mov det switch 2 wire UK
  • LRM1040 OS mov det IP44 180dgr
  • LRH1000 OS protection korb

Contact us

 

For business enquiries regarding any of our professional lighting systems.

You are now visiting our Global professional lighting website, visit your local website by going to the USA website