More brands from

Maxos, TL-D IP64 trunking

Maxos TL-D IP64 trunking – Added protection

      Product family information

      The IP64 trunking sections are made of hot-dip galvanized steel with a white powder coating. They are available in lengths of 1, 2 and 3 electrical units 36 and 58 W. Special seals between the sections and waterproof trunking end-pieces are used (please order separately).A flat ribbon cable (5 or 7 wires) is integrated in the trunking and guarantees (in combination with an integrated phase selection switch and contact blocks) safe and correct cabling. The 7-wire cable is used to integrate light regulation or emergency lighting for those electrical units that are equipped with emergency battery packs. Hence, no extra contact blocks or wiring need to be installed.For suspended light-lines, the trunking sections are connected using the integrated electrical connector and a sturdy external mechanical coupling piece (accessory). Surface-mounted light lines use the same integrated electrical connector and an internal coupler (accessory). On the upper part of the trunking section, special knock-out openings enable cable entry wherever needed.The IP64 trunking can be equipped with special IP64 electrical units and different reflectors.The outstanding stability of the sections and coupling pieces allows suspension intervals of 3.4 to 4.8 m.

      Benefits

      Meets any electrical requirement; from 5 pole flat ribbon to 2x7 pole flat ribbon wiring

      Features

      Easy to install
      Integrated flat-ribbon cables, phase-selection switch and contact blocks guarantee safe and correct cabling.
      Suspension intervals of 3.4 to 4.8 m
      Possibility to integrate two NYM cables
      Wide choice of flat-ribbon cables: 1 x 5 x 1.5 or 2.5 mm 1 x 7 x 1.5 or 2.5 mm

      Applications

      Industry
      Downloads
      Leaflets
      Visuals
      Product family details
      General
      Type
      • 4MX056
      Length
      • 1 x, 2 x and 3 x length of electrical unit 36 and 58 W
      Wiring (1.5 or 2.5 mm2
      • Standard 5 pole (5 x 1.5 or 2.5)
      • Standard 7 pole for dimming (7 x 1.5 or 2.5)
      Option
      • Double wiring (for additional functionality)
      Material
      • Hot-dip galvanized steel, coated white (WH)
      Accessory
      • Trunking end pieces and mains connection set (9MX056 EP IP64 SET), gasket between trunkings (9MX056 GK IP64), blind cover (9MX056 BC36/58 IP64), PC procetion tube
      Remarks
      • Not for permanent wet conditions, corrosion possible over time
      • Check a product to add
         
      • Check a product to add
         
      • Check a product to add
         
      Check a product to add

      Cannot find what you're looking for?
      Perhaps one of these links might help

      Contact us   
      Distributor or partner finder