Medium Pressure-High power, small footprint

Medium Pressure

    Product family information

    Medium Pressure Mercury lamps are available in a wide range with an arc length between 10 and 140 centimeter. The lamps can be fitted with various types of end fitting from our catalogue, or equipped with customer special fittings, cables or pins. The lamps are made from selected types of quartz glass, with transmission characteristics tailored to the application.Medium Pressure Mercury lamps contain sophisticated quantities of mercury bromides, providing a self-cleaning halogen cycle, to control the depreciation of UV radiation over lamp life.

    Benefits

    Security of effective disinfection over the complete lifetime of the lamp
    High system efficacy because it is not required to over-design the purification system to maintain effectiveness of disinfection
    The unique P3 technology allows for more design freedom, longer lamp life, better lifetime reliability (reduced early failures) and better performance
    Lamps can be custom made

    Features

    Short-wave UV radiation with a peak at 253.7 nm (UVC) for disinfection
    Precisely dosed quantities of mercury bromides providing a self-cleaning halogen cycle to ensure constant UV output over the complete lifetime of the lamp
    Available with patented P3 (Philips Pinch Protection) technology to secure optimal lifetime behavior including higher heat tolerance on the pinch
    HOK /80 and /120 lamps can be loaded up to 80 and 120W respectively per cm of arc length
    Horizontal burning position +/-10°
    Different dimensions available on request

    System

    A choke and ignitor can be used at up to 2 kW lamp power
    A transformer-type circuit is required for lamp powers over 2 kW
    Information on electronic drivers available on request

    Applications

    Deactivation of bacteria, viruses and other micro-organisms
    Water treatment (waste-, drinking- or process water)
    Surface treatment
    Advanced oxidation (with special quartz glass)
    Ship ballast water treatment

    Warning & Safety

    A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
    Downloads
    Leaflets
    Visuals
    • Check a product to add
       
    • Check a product to add
       
    • Check a product to add
       
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder