More brands from

MASTER TL-D Food Secura

Shatterfree fluorescent lighting

MASTER TL-D Food Secura

      Product family information

      The TL-D Food Secura lamp makes the appearance of meat and bakery products more fresh and tasty and has a protective coating that keeps glass and lamp components together in the event of accidental breakage. The lamp is easily identifiable by two blue rings at one end. Application areas are all places where glass shatters can have an impact on product exposure and safety. The lamp has a Surlyn coating which blocks UV light. It is compliant with HACCP regulations. It can be applied for food illumination in butcher shops, bakeries, supermarkets etc.


      Makes the appearance of food (especially meat) more tasty
      Special protective coating around the lamp, prevents products from contamination in case of accidental lamp breakage; easily recognized in audit situations by two blue rings at one end
      Better protection of illuminated products from discoloring and loss of taste by about 90 % lower UV-A emission
      Makes luminaires compliant with relevant standards in the industry, such as HACCP, ISO 22000 and IEC 61549: Fragment Retention Lamp Standard


      Protective coating (Surlyn) around the lamp, indicated by two blue rings at one lamp end. This lamp is NOT meant for application in closed luminaires
      Without having a red appearance themselves, the lamps emphasize deep red colors such as those of meat
      Fully compliant with IEC 61549 - Fragment Retention Lamp Standard and with relevant standards in the food industry, such as HACCP and ISO 22000
      No degradation under influence of temperature or UV
      Fully recyclable, including the protective lamp coating


      Food illumination: spectral distribution optimally tuned to provide a good appearance of food in butcher's shops

      Warning & Safety

      Not suitable for closed luminaires (as indicated by two blue rings)
      Recommended use in combination with self-stopping lamp control system
      A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
      In order to ensure the integrity of the coating, it is strongly recommended to replace Secura lamps before or at the moment the specified lamp life (50% failures @ 3 hrs switching cycle) is reached.
      • Check a product to add
      • Check a product to add
      • Check a product to add
      Check a product to add

      Cannot find what you're looking for?
      Perhaps one of these links might help

      Contact us   
      Distributor or partner finder