View all 5 products

Lowest overall running costs and highest output!

MASTER PL-T Xtra 4 Pin

MASTER PL-T Xtra 4 Pin

  • Name

    Product family information

    MASTER PL-T Xtra is an efficient compact fluorescent lamp, typically used in general downlights for retail, hospitality and office applications demanding higher lighting levels. MASTER PL-T Xtra lamps furthermore provide significantly lower operating costs thanks to their lifetime, which is more than double that of a standard MASTER PL-T lamp, and their very low early failure rate. The original Philips-invented bridge technology guarantees optimum performance in the application, enabling more light and higher efficacy than the bended technology. The 4-pin version is designed for operation on electronic gear and is provided with a plug-in/pull-out lamp base.


    Extra long life
    Longer lifetime and less early failures lead to less hassle and lower maintenance costs and facilitate the change from spot to group replacement
    Optimal light performance for long operation per switch-on
    More light (about 15% more) per light point than common


    4-pin base
    Philips bridging technology applied
    Extra long lifetime and less early failures
    Fluorescent tri-phosphor technology
    Low light depreciation over lamp life
    Fast light run-up


    Designed for general or supplementary lighting in professional and semi-professional environments
    Ideal for use in recessed or surface mounted downlighters, wall units, outdoor lighting
    Suitable for use in applications where maintenance costs are high (high ceilings, difficult to reach): department stores, supermarkets, warehouses, production halls and public areas

    Warning & Safety

    Lamp light technical and electrical characteristics are influenced by operating conditions, i.e. lamp ambient temperature and operating position as well as applied HF control gear
    Shorter lamp life when often switching and not well pre-heated electrodes
    A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
    • Check a product to add
    • Check a product to add
    • Check a product to add
    Check a product to add

    Cannot find what you're looking for?
    Perhaps one of these links might help

    Contact us   
    Distributor or partner finder