Networking
devices

To bring together all of the different devices that a lighting system requires, Philips offers a range of networking and integration devices that ensure problem-free installation and smooth operations.
AmpLight

AmpLight

 

Cost effective Telemanagement, with remote control of outdoor lighting on highways, roads, streets and in residential areas. Saves energy by enabling a group of light points to be switched on or off at any given time or set to pre-determined dimming level. Makes outdoor lighting installations intelligent and dynamic, minimizing light pollution and increasing safety.

 

View product

Data Enabler Intelli

Data Enabler Intelli

 

The Data Enabler IntelliPower works in conjunction with the Data Receiver IntelliPower to send high-bandwidth control data to fixtures over standard 2 + ground wiring, enabling the integration of intelligent LED lighting solutions into existing power systems.

 

View product  

Data Enabler Pro

Data Enabler Pro

 

Data Enabler Pro delivers integrated data and power to intelligent color and tunable white LED lighting fixtures employing Powercore technology from Philips Color Kinetics. Data Enabler Pro is the single solution for all intelligent Powercore-based installations, whether DMX or Ethernet, color or white, indoors or outdoors.

 

View product 

Data Receiver Intelli

Data Receiver Intelli

 

The Data Receiver IntelliPower works in conjunction with the Data Enabler IntelliPower to send high-bandwidth control data to fixtures over standard 2 + ground wiring, enabling the integration of intelligent LED lighting solutions into existing power systems.

 

View product 

DMX Splitter/Booster

DMX Splitter/Booster

 

Philips Showline RDM-6Wall Splitter is a 6-output DMX/RDM splitter with DMX/RDM pass-through. This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6 X 32.

 

View product 

Dynalite Integration Devices

Dynalite Integration Devices

 

Philips Dynalite has developed a range of gateway devices that can be used to synchronize these systems’ functions into one integrated system solution. By utilizing the correct gateway, different systems can be integrated, allowing end-users access to a fully automated site from one interface.By successfully integrating third-party systems with a Dynalite solution, repetitive end-user interaction is reduced.

 

View product    Downloads

Dynalite Network Devices

Dynalite Network Devices

 

To bring all the different devices together, Philips Dynalite supports a range of network devices that are useful in creating a problem-free installation.

 

View product    Downloads

Multi Protocol Converter

Multi Protocol Converter

 

Multi-Protocol Converter is a compact device that performs a range of lighting protocol conversions, including KiNET, the Ethernet lighting protocol from Philips Color Kinetics, to DMX512, DMX512 to KiNET, and RS232 to KiNET. KiNET to DMX512 conversion lets you use DMX-based power / data supplies with any KiNET-based device.

 

View product 

PDS-150e 24V

PDS-150e 24V

 

PDS-150e is an indoor-rated power / data supply designed for C-Splash 2, ColorBlast 6, ColorBurst 6, and ColorBlast 12 fixtures from Philips Color Kinetics.

 

View product

PDS-60 24V

PDS-60 24V

 

PDS-60 24 V is a versatile power / data supply designed for indoor and outdoor LED lighting installations using fixtures from Philips Color Kinetics.

 

View product

PDS-60ca 24V

PDS-60ca 24V

 

PDS-60ca 24 V DMX / Ethernet is a versatile power / data supply designed for indoor and outdoor LED lighting fixtures employing Chromasic technology from Philips Color Kinetics.

 

View product

PDS-60ca 7.5V

PDS-60ca 7.5V

 

PDS-60ca 7.5 V is a versatile power / data supply designed for indoor and outdoor LED lighting fixtures employing Chromasic technology from Philips Color Kinetics.

 

View product

PDS-70mr 24V

PDS-70mr 24V

 

PDS-70mr 24V is a power / data supply designed for LED lighting installations featuring MR LED lamps from Philips Color Kinetics. PDS-70mr 24V outputs a maximum of 72 W in Ethernet, DMX, and Pre-programmed versions.

 

View product

sPDS-480ca 24V

sPDS-480ca 24V

 

sPDS-480ca 24V is a power / data supply designed for large-scale Ethernet LED lighting installations using low-voltage fixtures from Philips Color Kinetics.

 

View product

sPDS-480ca 7.5V

sPDS-480ca 7.5V

 

sPDS-480ca 7.5V is a power / data supply designed for large-scale Ethernet LED lighting installations using low-voltage fixtures from Philips Color Kinetics.
 

View product

sPDS-60ca 24V

sPDS-60ca 24V

 

sPDS-60ca 24V is a compact power / data supply designed for up to 30 low voltage linear fixtures from Philips Color Kinetics.

 

View product

Starsense Powerline

Starsense Powerline

 

Starsense Powerline is a networked controls system based on two-way power line communication using the LonWorks® open protocol. The system - making use of the existing power grid - enables individual light points to be controlled remotely and to be managed via online platforms, like CityTouch.

 

View product

Starsense Wireless

Starsense Wireless

 

Starsense Wireless is a networked controls system based on two-way wireless communication using the latest in mesh network technology. The system enables individual light points to be controlled remotely and to be managed via online platforms, like CityTouch.

 

View product

See what lighting systems can do...

You are now visiting our Global professional lighting website, visit your local website by going to the USA website